Permanent Magnetic Drum

Permanent Magnetic Drum-Remove the waste rock and waste material automatically by the permanent magnetic drum

CT permanent magnet drum is used for rough separation  after primary crushing or intermediate crushing in lean iron concentrator to remove part of the waste rock and reduce the load of the next stage operation. It is used in some operations before the smelting of rich iron ore. After primary and intermediate crushing, most of the waste rocks are thrown away by magnetic drum to improve the grade of the furnace. For reduction closed-circuit roasting of hematite operation, after separation by magnetic drum , the ore (raw ore) which has not been fully reduced is returned to roast to control roasting quality. Used for removing iron from used sand in foundry industry. Remove iron from coal in power industry and the purification of ferromagnetic inclusions and materials in other industries. The machine uses the magnetic force produced by the permanent magnetic drum to automatically remove part of the waste rock and waste material through belt rotation, thus completing the sorting operation.

 

 Permanent Magnetic Drum-Remove the waste rock and waste material automatically by the permanent magnetic drum

CT permanent magnetic drum

 

 

Model

Drum size(mm)

Width of belt(mm)

Magnetic field on drum surface

Selected particle size(mm)

Processing capacity (t/h)

CT-67

Ø630x750

650

120-300

10-75

110

CT-87

Ø800x750

650

120-300

10-75

160

CT-89

Ø800x950

800

120-&00

10-100

220

CT-811

Ø800x1150

1000

120-500

10-100

280

CT-1014

Ø1000x1400

1200

120-500

10-300

600

CT-1216

Ø1200x1600

1800

120-500

10-350

1000

CT-1424

Ø1400x2400

2000

120-500

10-350

1800

 

 Note: The parameter in above tables are for reference only. The products can be customized and the relevant parameters should be provided.

 

Permanent Magnetic Drum-Remove the waste rock and waste material automatically by the permanent magnetic drumPermanent Magnetic Drum-Remove the waste rock and waste material automatically by the permanent magnetic drum

 

Note: The size of drum and magnetic field on the surface of drum can be specified according to user's requirement

 

.Large discarding tailings magnetic drum

The large discarding tailings magnetic drum developed by our factory is mainly used for removing part of the waste rock and waste material automatically by using the magnetic force produced by the permanent magnetic drum after crushing or intermediate crushing of iron ore. It can also be used for iron removal of materials.

 

 Assembling drawing of full-magnetic drum:

  

The general structure is shown as the following figure:

 

Parameter range of CT series permanent magnet drum:

Serial No.

Diameter mm

Length mm

Belt width mm

Magnetic field on surface mT

Feed particle-size mm

Capacity/h

CT-***

Φ500~15000

600~2400                           

500~2200

120~600 

10~300    

70~2000 

Note: The parameter in above tables are for reference only. The products can be customized and the relevant parameters should be provided.

 

Permanent Magnetic Drum-Remove the waste rock and waste material automatically by the permanent magnetic drum